Single-channel cable/terrestrial receiver for PCIe
DekTec's PCIe hardware-based receiver for DVB-T2, T, C2, C and ISDB-T. With full support for single- and multi-PLP, as well as SISO and MISO, this low-profile card is perfectly compliant to DVB-T2 v1.3.1.
|RF frequency||VHF, UHF
42 to 880MHz
|Sup. bandwidth||1.7 / 5 / 6 / 7 / 8MHz|
|Input Sensitivity||-90 to -20dBm|
|Input return loss||>8dB|
Inputs and Outputs
|RF in||75-Ω F female|
|PCI Express||PCIe x1|
|Included with base product||
|Processor||Core i5 minimum
Core i7 recommended
Or equivalent AMD CPUs
|Single-channel cable/terrestrial receiver for PCIe with StreamXpert Lite software.|
|Single-channel cable/terrestrial receiver for PCIe with VF-REC stream recorder and StreamXpert Lite software.|
|Single-channel cable/terrestrial receiver for PCIe with StreamXpert analyzer software.|
|Single-channel cable/terrestrial receiver for PCIe with MuxXpert.|
Prices exclude applicable sales tax, shipping charges and customs duties. Quantity discounts may be available, please request a quotation.
DTA-2115B – All-standard VHF/UHF/L-band modulator for PCIe
The DTA-2115B is a high-end modulator that supports all modulation standards that can be received by the DTA-2138B. You can use it for testing or validating your application.
DTA-2131 – Multi-standard cable/terrestrial receiver for PCIe
Both the DTA-2131 and the DTA-2138B are VHF/UHF receivers that can receive several cable and terrestrial standards: The DTA-2138B is based on a hardware demodulator chip, while the DTA-2131 is a 'Software Defined Receiver' (SDR).
The DTA-2138 has a low CPU load (close to zero), while the DTA-2131 consumes a lot of CPU cycles. The DTA-2138's yield of these CPU cycles is advanced measurements including impulse response, spectrum and transfer functions, and support for additional standards such as DAB+.