Multi-standard VHF/UHF receiver for PCIe
High-quality I/Q sampler that comes with a set of software-based demodulators for an increasing range of QAM- and OFDM-based standards. The SDR approach enables full-channel reception (not just one service) and advanced measurements and graphs.
|RF frequency||VHF, UHF
42 to 870MHz
|Bandwidth||Up to 10MHz|
|Sensitivity||-90 to -20dBm|
|Measurements||MER: 10 to 42dB|
Inputs and Outputs
|RF in||75-Ω F female|
|PCI Express||PCIe gen1 x1|
|Included with base product||ATSC VSB
|Options||ATSC 3.0 (requires RXA option)
RXA advanced measurements
|More options||I/Q sample capturing
|GOLD option||All options in this table, plus any future option developed for the DTA-2131|
|Processor||Core i7 recommended
Or equivalent AMD CPUs
|StreamXpert||Our industry-standard transport-stream analyzer|
|VF-Rec||SDI/TS recorder with looping, scheduling, JPEG-2000 compression and more|
|Atsc3Xpert||Analysis of ATSC-3 with advanced RF measurements|
|C2Xpert||Analysis of DVB-T2 with advanced RF measurements|
|T2Xpert||Analysis of DVB-T2 with advanced RF measurements|
|DekTec SDKs||Create your own application|
|Multi-standard VHF/UHF receiver for PCIe with StreamXpert Lite software.|
|Multi-standard VHF/UHF receiver for PCIe with StreamXpert 2.1 stream analyzer software.|
|Multi-standard VHF/UHF receiver for PCIe with advanced demodulation/RF-analysis and StreamXpert 2.1 stream analyzer software.|
|Multi-standard VHF/UHF receiver for PCIe with StreamXpert and all current- and future reception and advanced RF analysis options.|
|The base version of the DTA-2131 supports reception of TV signals listed under "Modulation Standards" above. Please refer to Receiver Options for all available options.|
Prices exclude applicable sales tax, shipping charges and customs duties. Quantity discounts are available, please request a quotation.
DTA-2136 – Dual QAM-A/B/C receiver for PCIe
PCI Express dual-channel QAM-A/B/C receiver.
If you are looking for a hardware-based QAM-only receiver, the DTA-2136 is a good alternative. The DTA-2131 support DVB-C (QAM-A), but for other QAM-annexes you can consider the DTA-2136 instead.
DTA-2137C – Satellite receiver for PCIe
PCI Express dual-channel satellite receiver.
For receiving DVB-S or DVB-S2 satellite signals, the DTA-2137C is the card to go for. Where the DTA-2131 is the ultimate card for receiving UHF/VHF, the DTA-2137C is the one for satellite.
DTA-2138B – DVB-T2, DVB-C2, ISDB-T receiver for PCIe
DekTec's hardware-based DVB-T2/C2 and ISDB-T demodulator.
Compared to the DTA-2131, the DTA-2138 takes less PC resources, due to the hardware-based demodulation; on the other end, it can't be extended with future demodulation options.