DTA-100DTA-100 Key Attributes
| Physical Layer | DVB-ASI (Coax) |
| DVB-ASI Connector | 75-Ω BNC (2x) |
| Transmit Rate | 0...150 Mbps |
| Transmit Rate Resolution | < 1 bps |
| Transmit Rate Stability | < ±10 ppm |
| Burst Mode On/Off | yes |
| Maximum Jitter | 70 ns p-p |
| Packet Size | 188 or 204* |
| PCI rev 2.2 compliancy | 32 bit, 33 MHz Universal 3V/5V |
* Arbitrary packet size in raw mode
Resources
Leaflet
- Application Software
- DVB-T2 Tool Set
- Networked Adapters
- OEM Modules
- PCI
- PCI Express
- DTA-2107 - L-Band Modulator
- DTA-2111 - VHF/UHF Modulator
- DTA-2131 - SDR Receiver
- DTA-2136 - Dual QAM Receiver
- DTA-2137C - DVB-S2 Receiver
- DTA-2138 - DVB-C2/T2 Receiver
- DTA-2139 - 12x QAM Receiver
- DTA-2144 - Quad ASI/SD-SDI
- DTA-2145 - Dual ASI/SD-SDI
- DTA-2152 - Dual HD-SDI
- DTA-2160 - GigE + 3x ASI
- DTA-2162 - Dual GigE
- PCI Modulators
- PCI Express Modulators
- USB-2 Adapters
- SDKs
DTA-100
DVB-ASI Output Adapter for
PCI Bus
Please use DTA-105 instead
DTA-100 Features
- High-speed transport-stream output, compliant to DVB-ASI as defined in DVB document A010 and EN50083-9
- Output bit rate from 0 to 150 Mbps, dynamically programmable in steps < 1bps
- Double-buffering: DVB-ASI output available on two BNC connectors
- Hardware-assisted NULL packet insertion
- 8-Mbytes on-board buffer to compensate for PCI- and software latencies
- Support for 188-byte and 204-byte packets
- Continuous mode or burst mode
- Universal PCI Adapter for both 3.3V and 5V environments
- PCI rev2.2, 32 bit, 33 MHz
DTA-100 Applications
- General purpose PCI card for generating an MPEG-2 transport stream on DVB-ASI
- MPEG-2 transport-stream test generator
Block Diagram
